CODES & COMPLIANCES Click here for UL Ratings for typical roofing systems. Check with your roofing system manufacturer for additional requirements. Spec this Product	RECOMMENDED USES Recommended uses include: Part of a "Class A" assembly over combustible and noncombustible decks and extruded polystyrene. Part of a "Class A" assembly over combustible and noncombustible decks and expanded polystyrene. Part of a "Class B" assembly over combustible decks covered by metal roof panels.
INSTALLATION FR10 General Installation Applications Atlas Fire-Retardant Slipsheets are lightweight, easy to handle and, therefore, quicker to install than gypsum or other thermal barrier boards. The slipsheet should be rolled out, overlapping the preceeding sheet a minimum of two (2) inches. Endlaps are also a two (2) inch minimum. Consult the membrane manufacturer for specific application recommendations (e.g., slipsheet roll direction perpendicular to membrane roll). Mechanical attachment of the slipsheet is not needed in most applications. The patented coating provides just enough weight to anchor the sheet until the membrane is installed. Token mechanical or adhesive attachment may be necessary under windy conditions. Install only as much slipsheet as can be covered by the end of the day.   Complete Instructions	STORAGE Factory-applied packaging is intended soley for protection during transit. When stored outdoors or on the job site, the slipsheet rolls should be stacked on pallets at least four inches above ground level and completely covered with a weatherproof covering such as a tarpaulin.

Features & Benefits

Superior Protection Against Flame Spread & Penetration